CICO

Approx. 116 / Kg Get Latest Price

Product Brochure
TAPECRETE is an acrylic based Polymer modified cementitious composite coating system.

USES:

Polymer in conjunction with cement provides properties to combat the shortcomings of cement particularly its poor adhesion properties,low impact strength, low flexural strength and thin section fragility. TAPECRETE Polymer adds to the potential use as well as enhances the properties of cement mortar making them excellent choice for use in new as well as renovation work. TAPECRETE is used for surface treatment, protecting, waterproofing and repairing concrete and masonry.

UNIQUE FEATURES:

Combines a tough, hard-wearing surface with waterproofing. Allows trapped vapours to escape thus preventing peeling and blister formation.

OTHER FEATURES:


* Can be applied in uniform thickness to horizontal and vertical surfaces.* Develops excellent bond to most building materials.* Reduces or prevents salt penetration into concrete.* Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies.* Is highly durable in continuous wet condition.* Is non-flammable and does not give off toxic gases, when exposed to fire.* Will not rot or corrode.* Most properties improve with age.* Is not harmful to the health of workmen. 

CURING
TAPECRETE System must be applied with temperature above 10°C and below 35°C. During the first 12 hours of curing, it must be protected from abrasion, rain and other adverse conditions.
No traffic shall be allowed on a TAPECRETE treated surface within 48 hours after application.After application of final coat of TAPECRETE, initial air drying shall be done for 2 – 6 hours.During this period no water is to be used for curing. In case of high temperature and lowhumidity combined with high wind condition, the coating shall be covered with polythen sheet to avoid rapid drying of the coating. After maximum period of 6 hours the finalapplication moist curing shall be done for the next 24 hours by way of spraying water on
TAPECRETE COATING. During this period at no point of time should the TAPECRETEcoating be left completely dry or submerged in water.Following moist curing, the TAPECRETE coating shall be allowed to air dry for 3 daysbefore submersion in water if required for use. 

SHELF LIFE: 12 months if unopened
PACKING: 1 Kg, 5 Kg ,20 Kg. & 50 kg Container



 

Approx. 150 / Litre Get Latest Price

Product Brochure
Product Details :
DESCRIPTION
TAPECRETE is an acrylic based Polymer modified cementitious compositecoating system. 
USES
Polymer in conjunction with cement provides properties to combat the shortcomings of cement particularly its poor adhesion properties,low impact strength, low flexural strength and thin section fragility. 

TAPECRETE Polymer adds to the potential use as well as enhances the properties of cement mortar making them excellent choice for use in new as well as renovation work. 

UNIQUE FEATURES 

Combines a tough, hard-wearing surface with waterproofing. Allows trapped vapours to escape thus preventing peeling and blister formation. 

OTHER FEATURES 

• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Develops excellent bond to most building materials.
• Reduces or prevents salt penetration into concrete.
• Is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
• Is highly durable in continuous wet condition.
• Is non-flammable and does not give off toxic gases, when exposed to fire.
• Will not rot or corrode.
• Most properties improve with age.
• Is not harmful to the health of workmen. 

APPLICATION
Surface Preparation : 
Prior to application of TAPECRETE, surface must be prepared as mentioned below to avoid failure: 

• The surface shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bond between the surface and the TAPECRETE Coating.
• This can be done by scarifying, grinding, water blasting, sand blasting, acid washing or by any other approved method.
• New flat surface like sub-base concrete shall be made reasonably smooth so as not to impede the application of TAPECRETE Coating and to avoid sharp projections.
• All concrete surfaces shall be thoroughly pre-wetted for at least one hour prior to the application of TAPECRETE coating by pouring water on flat surface or by vigorously spraying water on vertical/inclined surfaces.
• When placing TAPECRETE Coating, water should be removed so that surface is only damp. In no case there should be standing water or a shiny wet surface.
• Depressions are filled and leveled using TAPECRETE fillers. For filler, the mixing ratio is 1 kg cement:1.5 by silica sand and 0.52 kg TAPECRETE. 

Approx. 1,250 / Drum Get Latest Price

Product Brochure
CICO NO.3 is high versatile free flowing colorless concrete additives in liquid form. It is used as quick setting cum rapid hardening admixture for concrete and plaster. This is also used as Antifreeze/deicing compound for plain concrete in sub zero climatic conditions. USES CICO NO.3 is used in underground basement, tunnels, emergency repair and stop huge ingress of water through structures, such as swimming pool, water treatment plant, reservoir etc. CICO No.3 is also used for execution of underground waterproofing work which restricts the water ingress for final waterproofing treatment. 

Approx. 40 / Kg Get Latest Price

Product Brochure
CICO NO.2 is an excellent time tested liquid admixture for emergency / immediate repair work. Due to very fast setting property, CICO NO.2 is used for instant leak plugging and quick fixing of nozzle and also widely used as plugging compound for basements, pipe joints, retaining walls, tunnels and sewage works, where water is pouring under pressure.FEATURES Excellent quality plugging compound – consistent performanceHigh early strength – plugging is completed within 5 minutesSimple application – excellent adhesion

Approx. 42 / Kg Get Latest Price

Product Brochure
CICO SUPER is normal setting integral cement waterproofing compound for concrete and mortar/plaster with normal plasticizing property in liquid form. CICO SUPER is a blend of specialty active ingredients to make concrete waterproof when there is permeability through hydrostatic pressure or capillary absorption. CICO SUPER conforms to IS 2645-2003 and available with ISI standard Mark. USES CICO SUPER is extensively used in RCC, Plain Cement Concrete and cement-sand mortar/ plaster intended for water tank, roof deck, ceiling, basement, retaining walls, exterior walls, lift pit or in a situation where hydro-insulation is a must.

Approx. 495 / Kg Get Latest Price

Product Brochure
ShaliGrout® 73 is a high-strength, non-metallic, non-shrink grout designed for precision grouting and general construction applications. It can be mixed to a fluid, flowable, or plastic consistency requiring only the addition of clean water. It is formulated as a natural aggregate system with a shrinkage- compensating binder and is highly flowable without sacrificing strength or performance capabilities. It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts. 

Approx. 120 / Litre Get Latest Price

Product Brochure
TAPECRETE is an acrylic based Polymer modified cementitious composite coating system. 

Polymer in conjunction with cement provides properties to combat the shortcomings of cement particularly its poor adhesion properties,low impact strength, low flexural strength and thin section fragility. TAPECRETE Polymer adds to the potential use as well as enhances the properties of cement mortar making them excellent choice for use in new as well as renovation work. TAPECRETE is used for surface treatment, protecting, waterproofing and repairing concrete and masonry.  

Approx. 562 / Drum Get Latest Price

Product Brochure
CICO NO.1 is yellow coloured viscous liquid based on reactive additives and micro particles suspension with anti corrosive properties. This is used as an Integral Cement Waterproofing Compound for Cement Concrete and Mortar. USES CICO NO.1 is used in construction of concrete roofs, bathrooms, sunken areas, swimming pools, basements, retaining walls, exterior plasters, etc.

Approx. 4,800 / Litre Get Latest Price

Product Brochure
CICO SUPER is normal setting integral cement waterproofing compound for concrete and mortar/plaster with normal plasticizing property in liquid form. CICO SUPER is a blend of specialty active ingredients to make concrete waterproof when there is permeability through hydrostatic pressure or capillary absorption. CICO SUPER conforms to IS 2645-2003 and available with ISI standard Mark. USES CICO SUPER is extensively used in RCC, Plain Cement Concrete and cement-sand mortar/ plaster intended for water tank, roof deck, ceiling, basement, retaining walls, exterior walls, lift pit or in a situation where hydro-insulation is a must.

Approx. 272 / Kg Get Latest Price

Product Brochure
DESCRIPTION Krystol T2® system is a surface-applied crystalline waterproofing treatment for concrete structures that is used to protect against the ingress of water. It is a dry powder, that when mixed with water becomes a coating that is applied to the inner or outer surface of the concrete structure. Krystol T2® is used in conjunction with Krystol T1® as a second coat or for coating on existing concrete surfaces for negative side waterproofing. Krystol T2® contains Kryton’s unique and proven Krystol® technology which reacts with un-hydrated cement particles to form millions of needlelike crystals. These crystals grow in a catalytic reaction, filling the naturally occurring pores and voids in concrete, and permanently blocking the pathways for water and waterborne contaminants. Later, if cracks form due to settling or shrinkage, incoming water triggers the crystallization process and additional crystals form, filling cracks and ensuring that the structure’s waterproofing barrier is maintained and protected. The concrete itself becomes the waterproof layer removing the need for any surface treatment.

Approx. 554 / Litre Get Latest Price

Product Brochure
ShaliPrime® Zn R is a two component, cold cure, epoxy resin blend with zinc powder. Unlikeregular paints / epoxies, which resists corrosion by forming and impermeable barrier between themetal and atmospheric moisture, ShaliPrime® Zn R provides corrosion protection through tinyelectrical cathodic cells formed by interaction of zinc with steel surface. Of course, ShaliPrime® ZnR provides some impermeable barrier as well. ShaliPrime® Zn R is superior to paints / epoxies inproviding corrosion protection.

Approx. 250 / Piece Get Latest Price

Product Brochure
ShaliSeal EMS (formerly known as ShaliEMS 700) is a two component, semi-rigid epoxy for filling control and construction joints in industrial concrete floors. The mixed sealant is self-leveling and can be poured directly into horizontal joints to form a tough resilient seal This product supports the joint edges and reduces spalling of the edges caused by wheel traffic.