Construction Chemicals

Approx. 390 / Kg Get Latest Price

Product Brochure
MasterTop 2200 is an easily workable filler compound that can be applied by either trowel, spatula or knife. It cures to give high mechanical properties typical ...

Approx. 820 / Kg Get Latest Price

Product Brochure
Bonding of wet cementitious materials to existingcementitious surfaces Ideal for roads, bridges, pavements, loading ba andfactories, for bonded pr granolithic floor toppings. Can be used for critical areas, on Damp Surfaces Can be used for horizontal & vertical surfaces Used for vertical and horizontal surface where mortarand concrete can be supported by form work forjacketing

Approx. 750 / Kg Get Latest Price

Product Brochure
ArmGrout Inject PU1 resin is a solvent free polyurethane injection material which is used in conjunction with ArmGrout InjectPU1 catalyst. ArmGrout Inject PU1 foams with water contact by high increase in volume and becomes firm visco elastic foam,which seals temporarily against further water penetration. ArmGrout Inject PU1 is resistant against acids and lyes and attacksneither bitumen nor joint tapes. In case of very dry surfaces the material does not foam immediately but it hardens slowly dueto the steady addition of existing air resp. soil moisture

Approx. 75 / Kg Get Latest Price

Product Brochure
CICO TAPECRETE RTU is a two pack polymer modified cementitious elastomeric protective and waterproof coating. When it hardens it develops excellent bonding property to most building materials. It is suitable in both interior and exterior building and all other civil engineering applications. Cured film of CICO TAPECRETE RTU prevents dampness in buildings tanks, roofs and other concrete structures permanently. USES  For sealing fine “hairline” cracks in concrete structures.  For waterproofing of concrete water tanks, pools etc.  For exterior waterproofing of basement walls in new buildings.  For all kinds of damp proofing and waterproofing in concrete, mortar, rendering, brickwork and block  work.  For sealing internal basement and cellar walls against dampness.  For Water proofing of Roof Gardens.

Approx. 464 / Litre Get Latest Price

Product Brochure
Dr. Fixit Roofseal Ultra is an elastomeric polyurethane hybrid next generation liquid applied protective roofwaterproofing coating designed to resist water intrusion. The high solids polymers in Dr. Fixit Roofseal Ultraprovides weather resistance mechanical properties, long-term durability. Upon curing, forming thick protectivetotally watertight, highly elastic and durable membrane without seams or joints. The waterproofing membraneis resistant to UV radiation, with high solar –reflectance index 106 and highly resistant to ponding water.Standard Compliance / SpecificationMeet and exceeds the ASTM D 6083 - Type I standard specificationTypical ApplicationsIdeal for waterproofing of terraces, flat and slope roof over old waterproofing surfaces} Brick-Bat Coba finish.} Cement mortar screed} China mosaic tile roofs} Complex detailing, up-stands, penetrations and terminations

Approx. 3,200 / Kg Get Latest Price

Product Brochure
ReArmMicro Concrete is ready to use single componentdrypowder cementitious material. It is supplied as a pre blended polymer modified dry powder the addition of recommendedwater at the site to producenon-shrinkfreeflowinghigh strength microconcrete.This isspeciallydesigned for repair to damaged reinforcedconcrete. It is suitable for use in wide range of repairs, pavements, ramps etc.

Approx. 196 / Bottle Get Latest Price

Product Brochure
ReArm Rust Remover is very effective product for removingmillscale and rust, besides removing thin films of oil andgrease ReArm Rust Remover isformulatedusing phosphoricacidsandotherchemicals.ReArm Rust Removerremoves thin filmsof oil / grease fromsteelsurfaces. Removesmillscale, rustandweldingscales.ReArm Rust Removercommands itself toyou onmanygrounds-efficiency, economy, and inventorysavingsin need ofwater

Approx. 50 / Pack Get Latest Price

Product Brochure
ArmGrout ADD is a specially formulated grouting aid. It plasticize the mix allowing for substantial reduction in water content without affecting the fluidity, thus improving the strength and impermeability of the grout. During the setting period of the grout it produces controlled expansion to compensate the normal plastic shrinkage of cement.

Approx. 490 / Bag Get Latest Price

Product Brochure
ArmGrout NS 50is free flow,Non-Shrink,high strength expansivegrout for thickness of 100mm. It canwith standsstatic load and dynamic load. It is based on portland cement,graded aggregatesand additives. The special additives usedimpart controlled expansion in the plastic state. The low W/C ratio ensures high Earlyand Final Compressive Strength. The flow characteristicof the grout fillsthe voids between the base plate and the concrete foundations completely and permanently. It effectively transfers all operational loads to the foundation.

Approx. 100 / Bag Get Latest Price

Product Brochure
ArmGrout NS 65is recommended for precision groutingwhere it is essential to withstand static load in typicalapplicationslike base plate of generators,compressors, boilers etc. It isbasically a free flow non-shrink,high strength expansive grout. It is based on port land cement with graded aggregatesand additiveswhich impart controlledexpansion in the plastic state. The non-shrink grout function is three folds 1) To fill the voids between the base plate and the concrete foundations completely and permanently without shrinkage orseparating from either2) Totransfer all loads from the baseplate to the concrete foundation and 3) Tomaintainprecise alignment. It effectively transfers all operational loads to the foundation.

Approx. 3,850 / Kg Get Latest Price

Product Brochure
ArmGrout Inject PU1resin is a solvent free polyurethane injection material which is used in conjunction withArmGrout Inject PU1catalyst.ArmGrout Inject PU1foamswithwatercontactby highincreaseinvolumeandbecomesfirmviscoelastic foam, whichsealstemporarilyagainst furtherwater penetration.ArmGrout Inject PU1is resistant against acids and lyes and attacks neither bitumen nor joint tapes. In case of very dry surfaces the material does not foamimmediatelybut it hardens slowly due to the steady addition ofexisting air resp. soil moisture.

Approx. 4,200 / Pack Get Latest Price

Product Brochure
ArmGrout Inject 2 is a solvent-free thin liquid, two- Component polyurethane resin.  ArmGrout Inject 2 is slow reacting and hardens to a non-foaming, non-rigid, pore free material which slightly foams when put into contact with water. ArmGrout Inject 2 bonds to a dry, moist surface and offers an excellent adhesion and tears resistance. ArmGrout Inject 2 has a low glass transition temperature and resists to winter temperatures without causing embrittlement and widening of cracks due to low temperatures without tearing. 

Approx. 1,700 / Litre Get Latest Price

Product Brochure
ShaliGrout EI (formerly known as ShaliPoxy Injection Grout) is 100% reactive, two component epoxy injection grout designed as a moisture insensitive adhesive for numerous injection and sealing needs.  This high modulus material is formulated as a super low viscosity intended for deep penetration into thin cracks

Approx. 69 / Kg Get Latest Price

Product Brochure
ShaliPlast® IW CI, an additive for RCC concrete, is an integral liquid waterproofing compound which protects concrete internally from ingress of water as well as saves the reinforcement bars against chloride induced corrosion. The unique bi-polar compound migrates through concrete during curing process and puts a passive layer over the reinforcement bar. 

Approx. 690 / Roll Get Latest Price

Product Brochure
ShaliCryl® LM HI is a single component, energy saving, highly elastomeric, UV resistant, heat insulative, micro fiber reinforced, monolithic, water based waterproofing acrylic liquid membrane having high mechanical strength and excellent weather resistance. The latest ceramic micro technology provides solar energy reflecting property enhancing cooling effect inside rooms, thus saving energy. The microspheres in the coating reflect most of the solar energy back to the atmosphere and allow hardly any radiation energy to penetrate through roof.

Approx. 5,500 / Kg Get Latest Price

Product Brochure
ArmGrout Epoxy IGis a two part epoxy resin system for grouting gaps ranging from 0.3 mm to 10 mm. It is a two part system consisting of a base and hardener.

Approx. 5,460 / Piece Get Latest Price

Product Brochure
ArmixDurafast ACLis a liquid accelerating admixture for plain cement concrete & mortar.  It is designed to accelerate the normal setting time of concrete. It increases early strengths of the concrete and mortars. It is intended toimprovise thephysical and engineering properties of concrete such asworkability, compressiveand flexural strengths

Approx. 60 / Kg Get Latest Price

Product Brochure
Armix HP 5 is asuper plasticizing,highwater reducing PCEbased concrete admixture for lowand high grade concrete. Intended for applicationswhere high water reduction and long work-ability retention'sare required.

Approx. 120 / Kg Get Latest Price

Product Brochure
ShaliGrout IP is a plasticized and non-shrink cement / mortar admixture for pressure / injection grouting.  By introducing into the   cementitious grout, it reduces   water cement ratio and facilitates volume expansion without segregation or bleeding.  It may also be used to get water tight dense structures. It complies with BS 8110 part 1, 1985, section 8.9.4.6

Approx. 1,300 / Roll Get Latest Price

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Approx. 602 / Kg Get Latest Price

Product Brochure
Patchroc has been specially designed to provide a fast set repairin concrete fl oors and pavements and is particularly usefulwhere traffi c must be kept fl owing with minimum down time.Patchroc w illbe of particular interest to industrial maintenance engineers,transport managers, airport authorities or anywhere that potholes in concrete cause a hazard to pedestrian and wheeledtraffi c.

Approx. 192 / Litre Get Latest Price

Product Brochure
For quick, clean and easy stripping of moulds and formwork. ■ For high quality, fair-faced and stain-free concrete. Advantages ■ Ensures easy release, reducing damage and improving efficiency of production. ■ Minimises surface blemishes and staining, promoting high quality fair-faced concrete even with white cement. ■ Reduces opportunity of damage to formwork, extending usable life. ■ Minimises cleaning of formwork before re-use. ■ Suitable for use with virtually all types of formwork. ■ Inhibits corrosion of steel formwork. 

Approx. 75 / Kg Get Latest Price

Product Brochure
Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified flexible, waterproofing & protective coatingcomposed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsionpolymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.Typical Application}} Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc.}}Ideal as a coating for waterproofing of roofs, chhajjas, canopies, etc.}}As waterproof coating on internal sides of domestic water tanks.}}Can be applied over internal damp walls and concrete surfaces due to its excellent bonding.

Approx. 180 / Litre Get Latest Price

Product Brochure
AquaArm Latex 45 is a single component product based on modified SBR latex, designed for use as a ready to usebonding agent and cement modifier. It is used as an admixture for obtaining waterproof concrete, plasters and mortars.

Approx. 80 / Kg Get Latest Price

Product Brochure
Dr. Fixit Pidifin 2K is a acrylic cementitious, polymer modified flexible, waterproofing & protective coatingcomposed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsionpolymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.Typical Application}} Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc.}}Ideal as a coating for waterproofing of roofs, chhajjas, canopies, etc.}}As waterproof coating on internal sides of domestic water tanks.}}Can be applied over internal damp walls and concrete surfaces due to its excellent bonding.

Approx. 420 / Bag Get Latest Price

Product Brochure
Asian Paints SmartCare Microconcrete is a dual shrinkage compensated, flowable micro-concrete. It is used for the repair and restoration of damaged RCC structures like beams, columns, slabs etc.

Approx. 400 / Kg Get Latest Price

Product Brochure
HEAT REFLECTIVE WATERPROOF COATINGFOR METAL ROOFS & TERRACESApplicationFor GI (Galvanized Corrugated) sheets prime the surfacewith a single coat of Anti-Corrosion Primer Dr. Fixit PrimerAC and for Metal Roof application apply single coat ofDr. Fixit Pidipoxy MI-EP two component epoxy primer (forpowder coated sheets) by brush, roller or spray at therate of 5 to 8 Sq.mt/litre.Apply two top coats of Dr. Fixit Cool Roof coating bybrush, roller or spray spread at the rate 2.7 - 3.0 Sq.mt/litre/coat to achieve DFT of up to 400 microns in timeinterval of 6 Hrs.*Coverage may vary

Approx. 98 / Kg Get Latest Price

Product Brochure
AquaArm Proof WP-P Integral waterproofing powder is composed of waterproofing additives in powder form, used forwaterproofing of concrete and cement plasters.

Approx. 178 / Kg Get Latest Price

Product Brochure
It is acrylic emulsion based, used as acement modifier when applied, provides good bond with masonry/ cement and thus improves the tensile and flexural strength properties of the mortar.

Approx. 170 / Litre Get Latest Price

Product Brochure
t is acrylic emulsion based, used as acement modifier when applied, provides good bond with masonry/ cement and thus improves the tensile and flexural strength properties of the morta

Approx. 327 / Kg Get Latest Price

Product Brochure
AquaArm Damp Coat is atwo-componentepoxy resin basedwaterproofing compound. One part is consisting of epoxyresin and the other part with curing agent. After mixing boththe parts it can be thinned down with water. It possessesall the attributes of normal solvent based epoxy compositions such as excellent water and chemical resistance, adhesion, hardness, toughnessandmechanical strength.

Approx. 400 / Kg Get Latest Price

Product Brochure
ReArm KrackFill Pasteis composed of high quality weatherdurable acrylic emulsion polymer based, single pack, ready to use flexibleputty for filling the cracks inplastered surfaces

Approx. 775 / Kg Get Latest Price

Product Brochure
ReArm Repair mortar is a polymer-modified, shrinkage compensatedmortar. For interior and exterior use without corrodingsubstances.Good processability of the flexible, pasty and stable mortar

Approx. 150 / Litre Get Latest Price

Product Brochure
ArmixSuper Plast is supplied as a brown colour liquid. It has been specially formulated to give high workability or to produce high quality concrete with better density and reduced permeability.

Approx. 1,400 / Square Meter Get Latest Price

Product Brochure
Dr. Fixit Prebond membrane is a preformed HDPE fully bonded membrane that bonds to the wet concrete cast on the membrane. After the membrane bonds with the concrete it forms an integral seal which prevents lateral water migration and makes it unaffected by any substrate settlement below the slabs. Reinforcement can be directly laid on top of the membrane and it does not require screed protection. Dr. Fixit Prebond is a unique HDPE membrane comprising of a virgin HDPE layer and a pressure sensitive adhesive layer which is covered by a weather proof protective layer. The adhesive layer is activated when the concrete is poured on the membrane and it enables the membrane bond to underside of the concrete which prevents the ingress of water into the structure as well as prevents tracking of water between the membrane and the structure and provide a positive side protection against ingress of sub soil water. Dr. Fixit Prebond can be used for horizontal as well as vertical blind side application.

Approx. 300 / Kg Get Latest Price

Product Brochure
Dr. Fixit Dampguard Classic is a two-component coating composed of epoxy resin, curing agent, inert pigments& properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water forapplication over cementitious surfaces. It is used as an internal coating for the damproofing treatments of watertanks with anti-microbial anti fungal properties. It has excellent water resistance, adhesion to concrete surface,has good hardness and sets faster.

Approx. 271 / Litre Get Latest Price

Product Brochure
Dr. Fixit Coal Tar Epoxy is two-part coal tar epoxy based coating, composed of best quality dehydrated coal tar,liquid epoxy resins and curing agent, properly selected & graded inert fillers, additives and solvent. It is used asan anticorrosive & protective coating for concrete as well as steel structure because it has excellent chemicalresistance properties in atmosphere or in contact with chemical solutions such as effluents, sewage, salty waterand organic / inorganic acids & alkalis. It is most suitable for structures in submerged conditions.Complies to ASTM : D 522 - 93, ASTM : D 7027 - 05, ASTM : B 117 & ASTM : 870-09, IS : 101.

Approx. 2,305 / Kg Get Latest Price

Product Brochure
AquaArm CemCoat is a two-component acrylic polymer modified waterproofing membrane which consists ofAquaArm CemCoatpowder andAquaArm CemCoat liquid acrylic Polymer. When mixed in the proper pro-portions, an easily brush able coating will produce.AquaArm CemCoatcan be applied by a stiff brush, or trowel to obtain the desired thickness. AquaArm CemCoatpowder grey consists of specially selected cements, graded hard wearing aggregates and additives supplied in powder andAquaArm CemCoat liquid component of blended acrylic copolymers. The polymer providesAquaArm CemCoatwith exceptional adhesion, toughness and durability.

Approx. 1,100 / Litre Get Latest Price

Product Brochure
ReArm Coat ZPis  a  two  component  system based    on  metallic  Zinc  and  Epoxy  resin  system. ReArm Coat ZPis a two-component anti-corrosion primer for reinforced steel in concreteas well as structural repair. it actively resists corrosion within the confines of the repair location.

Approx. 860 / Bag Get Latest Price

Product Brochure
ReArm Insta Plugischloridefreequicksettingcementwithimmediate start ofhardening after addition of wate