Laxmi Infrastructure

High strength non-shrink pourable cementitious precision grout. SikaGrout®-214 IN is a cement based 1-component,ready to mix, non-shrink, pourable and flowable, twostage expanding engineering grout in dry powderform. It is widely used for precision grouting in engineeringapplications subjected to static and dynamicloads.USESTo grout bearings, machine foundations, columnsjoints in precast construction etc.▪▪ To grout anchors in concrete▪ To grout cavities, gaps and voids in concreteTo grout base plate of turbine, compressor, boilers,pumps and heavy machinery▪▪ Sealing around penetrations▪ Post fixings.   USES:- To grout bearings, machine foundations, columns joints in precast construction etc. ▪ ▪ To grout anchors in concrete ▪ To grout cavities, gaps and voids in concrete To grout base plate of turbine, compressor, boilers, pumps and heavy machinery ▪ ▪ Sealing around penetrations ▪ Post fixings.     CHARACTERISTICS / ADVANTAGES:-  ▪ Dual shrinkage compensated ▪ Suitable for temperature of above 0 °C up to +200 °C ▪ Easy to mix, only add water ▪ Adjustable consistency ▪ Very good flow characteristics ▪ Rapid strength development ▪ Excellent bond to concrete ▪ No segregation or bleeding ▪ High final strengths ▪ Initial expansion by gas generation ▪ Impact and vibration resistant Non-corrosive to anchor bolts, base plate / saddle / frame, sliding plate ▪ ▪ Not harmful to concrete and reinforcing steel ▪ Not flammable ▪ Non-toxic ▪ Frost, oil and fire resistant ▪ Require normal curing Suitable to use under restraints and grout thickness required ▪ ▪ Expansive to counteract initial shrinkage Maximum flow distance is compatible to the dimensions of base plate / saddle / frame ▪ Resistant to the chemicals, gases etc. being handled in equipment ▪ ▪ Chloride free

Additional Information:

• Delivery Time: 1 day delivery delhi NCR
• Packaging Details: 30 kg bag

Asian Paints SmartCare Joint Tapes are intended for waterproofing of all ‘L’ shaped construction joints in buildings and residential areas. These are made of advanced elastomer EPDM rubber which characterizes very good elasticity, viscosity and weather resistance

DESCRIPTION :- Sika Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.   USES:- Sika® Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: ▪ Warehouses ▪ Factories ▪ Shopping malls ▪ Public areas ▪ Restaurants ▪ Museums ▪ Parking lots ▪ Garages and Service stations.        APPLICATION:-  Application time for dryshake products is influenced by every variable which affects the placing of concrete, and can therefore vary substantially, depending on the prevailing conditions. Dependent on the conditions, remove the surface bleed water or allow it to evaporate. Sprinkle Sika® Chapdur (IN) onto the screed concrete evenly in 2 stages, first stage 60% and second stage 40%. Care must be taken to apply the product without creating ripples etc. in the concrete surface. The first application must be worked into the slab immediately followed by application of the second stage quantity of Sika® Chapdur (IN). Final finishing, closing pores and removing undulations can be achieved either by hand or powered trowel. Please also note: Never add water to the surface where the dry shake has been applied. ▪ Sika® Chapdur (IN) results in the slab surface becoming stiff more quickly than usual. Careful trimming must take place along the edges where adjoining slabs are to be poured. ▪ Periodical checking of the condition and development of the concrete will determine the correct time frame for each stage and sequence of application. For mechanical application with automatic spreader and laser screed, the spreading can start almost immediately after the concrete has been levelled to allow for the hydration of the dryshake. Compaction with the trowel can start as soon as the weight of the power trowels is supported by the concrete. For manual application, the dryshake must be spread once the concrete can be stepped on, without leaving a print deeper than 3–5 mm.

Additional Information:

• Delivery Time: 1 DAY DELIVERY