Product Details : At Batching Plant CWA 10 is to be added to the concrete during batching process before addition of mixing water subject to the type of batching
At Pouring Point in Transit Mixer Calculate total amount of cement/binder present in fresh concrete transported through transit mixer. Calculate total quantity of CWA 10 required as recommended in TDS (0.8 to 1% by wt of cement or total binder). Make slurry of CHRYSO CWA 10 with water in the ratio of approximately 2:1 by weight (i.e., 2part CHRYSO CWA10 and 1 part potable water) plant and operation
Advantages
Mixed with concrete at the time of batching
Sealing cracks or voids up to 0.5mm by crystal formation
Protects concrete exposed to harsh conditions
An integral system application
Crystals are insoluble in water therefore voids are sealed permanently.
Non-toxic and non-hazardous for drinking water and aquatic /marine life.
No side effect on fresh as well as hardened concrete.
Compatible with all types of concrete plasticizers / superplasticizers.
There is no need to alter the existing mix design, just add recommended dosage of CHRYSO CWA 10 in existing design of concrete mix.
Precautions Preferably store in sealed conventional containers, protected from extreme weather conditions.
Clean all tools and application equipment with water before it set. Clean immediately after use. Hardened /cured material can only be mechanically removed.
Asian Paints SmartCare Microconcrete is a dual shrinkage compensated, flowable micro-concrete. It is used for the repair and restoration of damaged RCC structures like beams, columns, slabs etc.